Equipment use

The machine is suitable for manufacturing high-strength, high-density dry net, double-warped flat wire dry net, multi-layer forming net and other industrial nets.

Technical Parameters of Loom

1. Polyester monofilament scope: warp 0.15-0.80mm; Weft 0.15-0.80mm.

2. Weft density range: 30-150 weft/10cm.

3. Reed width: 9500mm, 12500mm.

4. Speed: 50-60 r/min minutes, loom speed and fabric.

5. The total weight of the machine: 90 tons (about).

6. Overall dimensions: about 16500 × 7500 × 2500(mm).

Machine structure

1. Rack: composed of 9 sets of steel wall panels, installed on the overall base.

2. Main drive: driven by unilateral servo motor.

3. Opening form: double-acting heavy-duty side-pull arms are installed on both sides, equipped with 16 heald frames.

4. Weft insertion mechanism: water-cooled servo motor is adopted for double-sided rapier weft insertion. Middle handover weft insertion, 4-color weft selection.

5. Beating-up mechanism: adopt cam beating-up mechanism.

6. Coiling mechanism: special customized large torque double-sided worm gear reducer is adopted to synchronously control the three rollers to actively curl.

7, let-off mechanism: the use of electronic active control of the imported reducer let-off, double warp axis.

8. Network winding mechanism: the external center of the machine driven by the variable frequency motor through the reducer is used for winding.

9, lubrication system: the use of grease lubrication automatic oil supply and manual oil supply combination.

10. Control system: The whole machine adopts imported Omron PLC computer control, which can freely set various parameters of the loom, the fault electronic control stops, and the fault automatically displays.

This machine is suitable for manufacturing high-strength, high-density dry net, double-well flat wire dry net, multi-layer forming net and other industrial nets.