Product Introduction

The machine is suitable for the weaving of high-strength light-edged papermaking felt bottom net, especially for weaving ring-shaped bottom net fabric.

Technical parameters

1. Applicable scope of polyester monofilament: 0.1~0.5mm or 0.2mm x 6 strands.

2. Weft density range: 50~360 weft/10cm.

3. warp density range: 60~180 weft/10cm.

4. Reed width: 10000-20000mm.

5. Economic speed: 25-30 r/min.

6. The total power of the whole machine: about 40KW.

7. Machine weight: about 80T.

Main structure

1. Frame: The main wall panel adopts cast iron box structure, and the whole machine is installed on the overall base.

2. Main drive: double-motor double-sided coaxial transmission, each motor power 11KW, double pneumatic clutch, the main transmission box adopts elliptical gear transmission mechanism.

3. Opening mechanism: opening of double-sided pull arm structure, 12 pages of heald frame.

4. Weft insertion mechanism: adopt hydraulic shuttle way, double-sided 2x 2 shuttle box for shuttle selection mechanism.

5. Beating-up mechanism: multi-section split combined crank four-link beating-up.

6. Coiling mechanism: electronically controlled three rollers are actively coiling, and the upper and lower rollers are driven by servo motors respectively.

7, let-off mechanism: electronic control active let-off (single axis, sub-disk).

8. Network winding mechanism: independent stepper motor drive, machine outer surface winding.

9. Lubrication system: the combination of automatic oil supply and manual oil lubrication of the whole machine.

10. Control system: The whole machine adopts PLC programmable automatic control system, which can freely set various parameters of the loom, and the fault stops and automatically displays.

The machine is suitable for the weaving of high-strength light-edged papermaking felt bottom net, especially for weaving ring-shaped bottom net fabric.