Shijiazhuang Textile Machinery Co., Ltd. production of KSL-180 impact-resistant tear-resistant steel mesh loom,The machine can weave warp and weft of the impact-resistant and tear-resistant steel mesh of steel wire and warp of nylon wire, and weft of the ordinary steel wire curtain net of steel wire..

1.Can produce product varieties:

1. IW steel mesh

The warp yarn is mixed with steel wire rope and polyester wire rope, the weft yarn is steel wire rope, and the fabric structure is leno and twisted;

2. TW steel mesh

warp for wire rope andaramid cordrope blend, weft of polyester, nylon, aramid dip cord, fabric structure for leno twist.

3. Anti-tear net

Warp is polyesteror nylonThe wire rope, weft yarn is steel wire rope, and the fabric structure is twisted.

2. product characteristics

   The skeleton material can be used as a conveyor belt core. With high temperature resistance, impact resistance, tear resistance, no delamination failure, and other characteristics.

   Heat resistant: The steel curtain frame can withstand high temperatures and is unlikely to burn through; and the steel material distributed in the mesh can also help channel heat dissipation.

   resistanceImpact,ResistanceTear: The warp through steel wire rope is in the rubber, it works like a spring, and the external impact ability can be well absorbed; the weft reinforcing cord is woven with it above the longitudinal frame, making the longitudinal tear almost impossible.

   Failure without delamination:The application of transparent steel wire rope and the unique surface coating make the penetration and adhesion of rubber in the skeleton reach the best. The steel curtain mesh skeleton with vertical and horizontal interweaving is an integral single-layer structure, which will not cause delamination failure like EP delamination.

     Good grooving:The overall single-layer structure, and the latitudinal reinforced steel cord has very low stiffness (good flexibility), excellent grooving.

3.Warp specification and weft specification range:

This machine can adapt to the weft yarn, the specification range is as follows:

Warp:wire rope specifications:4X7X0.25 Φ2mm;

4X7X0.35 Φ2.85mm;

4X(0.5 6X0.44)Φ3.9mm ,  

           or other similar specifications, the maximum wire rope diameter is less than Φ3.9mm。

aramiddipping gluecord specifications:1100x5x5 -- 1100Dtex x 12 x3 The maximum diameter is lessΦ3.9mm.

twisted warp yarn:polyester cord specifications:2200 dtex x 2 - 2200 dtex x 3

nylon cord specifications:1870 dtex X 2

Wire Rope or Aramid Rope Spacing:7.5  -  15mm

The pitch and density of the twisted warp yarns of the polyester cords are the same as the pitch and density of the steel cords described above.

Weft:Wire Rope:3x7x0.22 Φ1.52mm --- 4 X(0.28 6 X0.25）Φ2.1mm,

or other similar specifications, maximum diameter<2.1mm

aramid cord1670dtex x 5x 3 (maximum diameter less2.1mm ）