DW200-2000 heavy duty papermaking circular blanket bottom net loom

Product Description

The machine is suitable for the weaving of high-strength light-edged papermaking felt bottom net, especially for weaving ring-shaped bottom net fabric.

Technical parameters:

1. Applicable scope of polyester monofilament: 0.1~0.5mm or 0.2mm x 6 strands.

2. Weft density range: 50~360 weft/10cm.

3. warp density range: 60~180 weft/10cm.

4. Reed width: 10000-20000mm.

5. Economic speed: 25-30 r/min.

6. The total power of the whole machine: about 40KW.

7. Machine weight: about 80T.

Main structure:

1. Frame: The main wall panel adopts cast iron box structure, and the whole machine is installed on the overall base.

2. Main drive: double-motor double-sided coaxial transmission, each motor power 11KW, double pneumatic clutch, the main transmission box adopts elliptical gear transmission mechanism.

3. Opening mechanism: opening of double-sided pull arm structure, 12 pages of heald frame.

4. Weft insertion mechanism: adopt hydraulic shuttle way, double-sided 2x 2 shuttle box for shuttle selection mechanism.

5. Beating-up mechanism: multi-section split combined crank four-link beating-up.

6. Coiling mechanism: electronically controlled three rollers are actively coiling, and the upper and lower rollers are driven by servo motors respectively.

7, let-off mechanism: electronic control active let-off (single axis, sub-disk).

8. Network winding mechanism: independent stepper motor drive, machine outer surface winding.

9. Lubrication system: the combination of automatic oil supply and manual oil lubrication of the whole machine.

10. Control system: The whole machine adopts PLC programmable automatic control system, which can freely set various parameters of the loom, and the fault stops and automatically displays.