DW100 Wide Rapier Loom

Product description

Technical Parameters:

1、Range of ply warp wires : 0.2 mm×6 plys, 88 picks /10 cm( plain weave)

2、Range of ply weft wires: 0.2 mm×3 plyd, 70 picks /10 cm( plain weave)

3、Range of weft and warp wires: Warp yarn 0.5mm, weft yarn 0.5mm, density of weft and warp yarn 70-80 picks /10cm( plain weave)

4、The range of adjustable weft density:20-500 picks /10 cm( plain weave)

5、Fabric Weight: 800g/㎡

6、Maximum Reed Width: 7000mm

7、Designed Speed: 70rpm.(According to your fabric and weacing condition.)

8、Power: about 7.5kw×2.

9、Beating-up Force: Not less than 1000kg/m

10、Outer space(mm): 11000×6000×2000

Main Constructions:

1、The main wallboard: Adopting iron box structure, the complete machine installed on the basement.

2、Main Drive: Adopting single reluctance motor drive.

3、Shedding: Adopting single side lift high speed dobby, 10 pieces of heald frames.

4、Weft Insertion: Servo motor drive, rapier insertion.

5、Beating-up: Short connecting rod, four linkage crankshaft beating up system.

6、Take up Mechanism: Servo motor drive, three rollers positive take up.

7、Let off: Servo motor drive, single warp beam let off.

8、Fabric Rolling : Cylinder drive, external fabric rolling system.

9、Lubrication system: The complete machine is lubricated with automatic grease lubrication and hand pump centralized oil lubrication.

10、Controlling System: With OMRON PLC computer control system, the complete machine can freely set up various parameters and automatically display faults.